Last week I showed my WIP DIY drop pods. In a push to get them table top ready for a team tournament this past weekend I managed to get them assembled and primed with a little bit of paint on them.I primed them in rust then gave them a light spray of silver from the top and a light spray of black primer from the bottom. This gives them a somewhat shaded look to start with. Then I blocked in the black (I put it on pretty thin, as you can see in the pictures) and filled the ‘eyes’ in with green. Although this doesn’t look great it’s good enough to get them on the table without completely ruining the overall effect of the army and lays a foundation for the rest of the paint job. After the tourney but before I snapped these pictures I added two layers of stippled red on the vanes.
The metallic spray paint I have doesn’t quite match the color used on the space marines. I’ll give these a thinned coat of that color to bring them in line with the rest of the army. The Reavers are based on various patterns of rusted steel plating to represent the interior of their space hulk, Niddhog, and I figure the inside of the pods should match this as well. The primary supports and mechanisms would be maintained in good shape but the tread plating would be prone to neglect. I hope to have time to finish these this week.
Next up will be my new (to me) landspeeders. I bought them last week on eBay and they’re still en route. Here are pics from the auction:
As you can see they are going to need some work. They were dirt cheap though and having to repair them will only help them fit in the slightly ramshackle aesthetic of the Reavers. I’ll be building Typhoon launchers for these and I may close up the crew compartment.
Please Rate This Article
Please take a second to rate this. It helps us deliver to you the stuff you enjoy.
Please rate this article to let us know what you think