I do a snow theme for the basing of my Chaos Space Marines. It can be difficult at times to make the basing interesting. Too much snow and you’ve got a white base. Too little snow and it can look odd and unrealistic. Being able to add in other little snowy details, like ice and icicles, can really step the basing up a level. So, today I’ll show you how to make icicles for your basing.
Previously I had only created icicles once for my Sorcerer in Terminator Armor. I was really happy with how they had come out, and I knew I’d want to try it again at some point. Well, the Chaos Master of Crusade model I bought had a great base for adding icicles to. So, I set about trying to document the process and learn how to replicate my previous attempt.
The Tools You’ll Need
You only need a few things: hot glue gun
Regarding the parchment paper – this is a must. I know in other countries it’s called by other names, but in the U.S. we have two similar types of baking paper: wax paper and parchment paper. Wax paper does not work for this process, as I learned the hard way. You will be putting hot glue on the paper, and the wax paper melts a bit into the hot glue, thus making it impossible to peel off after. However, with the parchment paper you can peel the dried hot glue off the paper with ease.
Creating the Icicles
This is so simple. Take your hot glue gun and squirt out a spot on the parchment paper. Then take a toothpick, or some other pointed object, place it in the hot glue and pull outwards. This should create a fork, two pointed parts in the hot glue. You have to do this quick and only once. The hot glue will dry pretty quick, so the toothpick will start sticking to the hot glue after 5-6 seconds.
You can see the icicles already – the pointed parts of the glue.
Trimming, Cleanup, and Glue
I let the glue dry for a good 5 minutes and then peeled it off the parchment paper. I looked for any oddities in the icicles and trimmed those away. Basically, I’m trying to make sure the point is sharp with no stray pieces of glue. Then I cut away the icicles from the rest of the glue.
Next, I glued them to the base. I recommend using tweezers for this part.
Also, worth noting is that the backside of the icicles will be flat, the side that was on the parchment paper. So, as you glue these on just make sure the flat side is facing inwards, leaving the rounded side out.
Sealing the Model
I put the icicles on before I seal the model. The reason being that I have to glue them to an already painted surface, which isn’t ideal. When you do that then the icicles are more likely to pull away since they’re attached to paint, not the model itself. So, by sealing the icicles with the model I help create another bonding layer.
Ideally I would glue the icicles to an unpainted surface. Then I could paint around them and in turn have a stronger bond. However, often times I don’t think about it until later, basically once I’ve got paint on there.
One of these days I’ll do it the proper way. That being said, I haven’t had any issues yet with the icicles on the previous model I’ve done, so it holds up pretty well.
Once everything is sealed, I came in with a brush on gloss sealer
I applied two layers of gloss sealer.
The Finishing Touches
The final step I did was to add the snow to the base of the model. I made sure to get it over where the icicles hang. Icicles are created by melting snow that freezes, so the snow is the source of them.
If you’d like to see some more shots of the model then check out the Abaddon the Despoiler painting showcase.
Here’s another model I did the same technique on. This was actually the first model I did it for. I thought I would show it so you can see the variances in the icicles. That’s the cool part with the technique, they’re unique every single time.
You can view the full gallery of shots for the Sorcerer in Terminator Armor if you’d like.
You could use this same technique to make larger icicles for terrain easily. Also, with paint you could turn the icicles into stalactites or stalagmites.
That’s it! A very simple tutorial with, what I think, is a very convincing result.
If you have any other tutorials you’d like me to do then please let me know in the comments.